VPN - Cisco Client Install Error (Windows)


This article addresses an installation error for Cisco VPN on Windows.

The error presented indicates that Internet Connection Sharing is enabled. To disable this setting and download the VPN, refer to the instructions in the Resolution panel.

Issue

You may encounter an error message while trying to install the Cisco Secure Client for Windows.

Error: "The VPN client was unable to create the interprocess communication depot"

This typically happens because Internet Connection Sharing (ICS) is enabled on Windows. Internet Connection Sharing (ICS) is not compatible with Cisco's VPN client.

Environment

This error is occurring within the Windows environment.

Internet Connection Sharing settings can be found in the Network and Sharing Center of the Control Panel. 

Cause

Internet Connection Sharing (ICS) is not compatible with the Cisco VPN client. You must disable ICS for proper VPN functionality.

Resolution

This panel provides steps to install or reinstall the Cisco VPN application on Windows.

If the drop-down is grayed out when you are about to set the "Startup Type to Disabled", it's because you need admin access on the computer. Please contact your departmental IT. If you have a Desktop Support computer, you can use "Admin by Request" or contact Desktop Support
.

Before disabling Internet Connection Sharing (ICS), you need to stop the Windows Installer for the VPN client.

Stop the Windows installer

  1. Open the Windows Task Manager (two ways):
    1. On your keyboard, press Ctrl + Shift + Esc.
    2. Right-click the Windows logo and select Task Manager.
  2. Locate the Windows Installer, right-click on it and select End process.

__________
Disable ICS

  1. Click the Start button (Windows).
  2. Enter ncpa.cpl and press Enter on your keyboard.
  3. Right-click on your active connection method and choose Properties.
  4. In the window that opens, click the Sharing tab.
  5. Ensure the checkbox is cleared to Allow other network users to connect through this computer's internet connection.
  6. Click OK.
  7. Reinstall the Cisco Secure Client.

__________
Disable Internet Connection Sharing (ICS)

  1. Click the Start button (Windows).
  2. Enter services.msc and press Enter on your keyboard.
  3. Double-Click on Internet Connection Sharing (ICS).
  4. In the drop-down, change the Startup Type to Disabled.
  5. Reboot the computer.
  6. Reinstall the Cisco Secure Client.